lifting magnets manufacturers,lifting magnets exporters,lifting magnets suppliers,lifting magnets OEM service.http://www.greatmagtech.com

lifting magnets manufacturers,lifting magnets exporters,lifting magnets suppliers,lifting magnets OEM service.http://www.greatmagtech.com

3.5 time safety factor lifting magnets. 100-6000KGs


Permanent, 2-pole magnet safety lifts and transfers round and flat steel
and iron without slings, hooks, or cables, and without electricity. 




Use
singly or in series with a spreader beam. Capacity is lower on thinner
materials. Paint, coatings, scale or other materials on the contact
surface may significantly reduce holding power.




Great Magtech permanent magnetic lifter has strong magnetic path produced by NdFeB magnet. 




On and off of the magnetic path is
controlled by turning the manual handle. The lifters have the features
of strong attraction, smaller volume, lighter weight,




powerful lifting effort, easy and safe to operate, long-period effort and without power supply.




They are been used to lift and transport the steel and iron for factories, docks, ware houses, transportation etc.











lifting magnets






















A Series of lifting magnets

A Series
Model	Rated lifting strength(Kgf)	Cylindrical lifting strength(Kgf)	Max.pull-off strength(Kgf)	L	B	H	R	Operation temperature	Dead weight
								(℃)	(Kg)
A-100	100	50	350	64	92	67	107	<80	3
A-300	300	150	1050	92	162	91	155	<80	7.5
A-600	600	300	2100	122	233	118	196	<80	23
A-1000	1000	500	3500	179	268	164	255	<80	55.5
A-2000	2000	1000	7000	234	378	212	426	<80	125
A-3000	3000	1500	10500	310	497	252	505	<80	220
A-6000	6000	3000	21000	442	621	210	548	<80	440

B Series of lifting magnets

B Series
	Rated lifting strength	Cylindrical lifting strength	Max. pull-off strength	L	B	R	H1	H2	F
Model	(Kgf)	(Kgf)	(Kgf)
100B	100	50	350	64	92	148	67	54	35
300B	300	150	1050	92	162	180	91	70	47
600B	600	300	2100	122	233	185	118	95	64
1000B	1000	500	3500	179	268	210	164	95	64
2000B	2000	1000	7000	234	378	365	212	120	80

C Series of lifting magnets

C Series
Model	Rated lifting strength	Cylindrical lifting strength	Max.pull-off strength	L	B	H	R	Operation temperature	Dead weight
	(Kgf)	(Kgf)	(Kgf)					(℃)	(Kg)
100C	100	50	350	64	92	67	107	<80	3
300C	300	150	1050	92	162	91	207	<80	7.5
600C	600	300	2100	122	233	118	247	<80	23
1000C	1000	500	3500	179	268	164	275	<80	55.5
2000C	2000	1000	7000	234	378	212	370	<80	125

D Series of lifting magnets

D Series
Model	Rated lifting strength(Kgf)	Cylindrical lifting strength(Kgf)	Max.pull-off strength(Kgf)	L	B	H	R	Operation temperature	Dead weight
	(Kgf)	(Kgf)	(Kgf)					(℃)	(Kg)
100D	100	50	350	64	92	67	148	<80	3
300D	300	150	1050	92	162	91	180	<80	7.5
600D	600	300	2100	122	233	118	185	<80	23
1000D	1000	500	3500	179	268	164	210	<80	55.5

E Series
Model	Rated lifting strength	Cylindrical lifting strength	Max.pull-off strength	L	B	H	R	Operation temperature	Dead weight
	(Kgf)	(Kgf)	(Kgf)					(℃)	(Kg)
100E	100	50	300	60	114	65	136	<80	3
150E	150	75	450	60	147	65	136	<80	3.5
200E	200	100	600	80	140	85	136	<80	6
300E	300	150	900	80	170	91	136	<80	9.5
500E	500	250	1500	100	225	110	150	<80	16
1000E	1000	500	300	176	300	165	285	<80	58
2000E	2000	1000	6000	200	400	210	335	<80	116.5

I Series
Model	Rated lifting strength	Cylindrical lifting strength	Max.pull-off strength	L	B	H	R	Operation temperature	Dead weight
	(Kgf)	(Kgf)	(Kgf)					(℃)	(Kg)
100I	100	50	350	60	94	121	140	<80	3
200I	200	100	700	80	118	156	140	<80	6
300I	300	150	1050	80	160	179	140	<80	9.5
600I	600	300	2100	105	243	210	170	<80	23
1000I	1000	500	3500	176	280	305	285	<80	58
2000I	2000	1000	7000	198	380	391	335	<80	116

J Series
Model	Rated lifting strength	Cylindrical lifting strength	Max.pull-off strength	L	B	H	R	Operation temperature	Dead weight
	(Kgf)	(Kgf)	(Kgf)					(℃)	(Kg)
300J	300	90	1050	132	162	60	180	<80	9.5
600J	600	200	2100	163	233	74	185	<80	23
1000J	1000	300	3500	190	300	85	210	<80	58
2000J	2000	600	7000	250	400	77	365	<80	116

 Packing: Wood case














We would love to see how you have used our magnets




Simply send us a photo of your magnets in use and if we use it on
our website we will return you $10 next order (Amount more than $1000).









Keep magnets away from kids and animals.

150C Higher temperature, neodymium ring magnets N40SH D25.4xd12.93x6.35mm

150C Max working temperature N40SH. Custom-made size and grade are always available.

Powerful neodymium ring magnets or tube magnets.

•	Rings and tubes have a regular straight walled through hole going through the center of the magnet.
•	Rings can be often magnetized through the thickness or the diameter, some special ring can be uni-pole or multi-poles.

ring magnets N40SH D25.4xd12.93x6.35mm

Technical drawing of ring magnets N40SH D25.4xd12.93x6.35mm

Specifications of ring magnets N40SH D25.4xd12.93x6.35mm:

Diameter:	25.40mm ± 0.05mm  / 1'' ± 0.002''
Thick/Long:	6.35mm ±  0.05mm  / 0.25'' ± 0.002"
Hole Dia:	12.95mm ± 0.05mm  / 0.51'' ± 0.002''
Surface Gauss	3665
Optimal Pull:	17.55 kg  / 38.7 lbs
Material	N40SH NdFeB Ring Magnets
Plating:	Nickel
Magnet Weight	0.644 oz
Grade	N40SH
Br	1.26-1.31 KG
Hcb	≥11.6 KOe
Hci	≥20 KOe
BHmax	38-41 MGOe
Tmax	150C / 302F
MOQ	2000 pcs
Leading Time	18-23 working days
Sample	Yes
Certificate	ISO2000, TS16949, RoHS, CE & SGS
Payment	T/T, PayPal, Western Union

Application of the GME ring magnets:


















----------------------------------------------------------------------------------------------------------------




Introduction of Great Magtech:

Advantages of GME ring magnets

1. High Grade / High performance of ring magnets:




GME highest grade: N54, 52M, 50H, 48SH, 42UH, 38EH, 33AH, etc.

















2. High Consistency of ring magnets: 




The Cpk of Remanence (Br) and Intrinsic Coercive Force (Hcj) are much higher than 1.67. 




The consistency of the surface magnetic field and magnetic flux can be controlled at +/-1%.


















3. High Working Temperature of ring magnets:




GME magnets can satisfy the working temperature requirements with excellent temperature resistance. 




The AH series with 40 kOe super-high coercive force can replace Smco magnets in most applications.













4. Low Weight loss of ring magnets:




GME super-high magnets have a long lifetime with the following specifications; PCT: 130C，humidity 100%，




vapor pressure 2.7bar, 20days，average low weight loss <2 mg/cm².













5. High anti-corrosion of ring magnets:




 coating Nickel-Copper-Epoxy is typically more than 1000 hours.
























Ring magnets Neodymium Magnets Manufacturing Processes:













Ring magnets Neodymium magnets main manfucturing equipments:











How we test our Ring magnets Neodymium Magnet:











How we pack Ring magnets strong neodymium magnets:

Our Ring magnets Neodymium Magnets are certificated by CE, Rosh....

We would love to see how you have used our magnets




Simply send us a photo of your magnets in use and if we use it on
our website we will return you $10 next order (Amount more than $1000).










WARNING:
Persons who are pregnant, wearing pacemakers, pacemaker defibrillators,
insulin pumps, or electric insulin devices, should not use magnetic
products.






neodymium ring magnets N40SH D25.4xd12.93x6.35mm manufacturers,neodymium ring magnets N40SH D25.4xd12.93x6.35mm exporters,neodymium ring magnets N40SH D25.4xd12.93x6.35mm suppliers,neodymium ring magnets N40SH D25.4xd12.93x6.35mm OEM service.

cup magnets POTN01-76.2 manufacturers

cup magnets POTN01-76.2 manufacturers,cup magnets POTN01-76.2 exporters,cup magnets POTN01-76.2 suppliers,cup magnets POTN01-76.2 OEM service.



cup magnets POTN01-76.2, expected strong power


GME, where you can find awesome quality, but also great service!




Cup Magnets are strong neodymium magnets that are set inside a steel cup or channel. 




Most of cup magnets come in round shapes, but we also offer a few Rectangular Mounting Magnets.




These are powerful neodymium magnets housed inside of a stainless steel cup. 




The cup protects the magnet and also increases the magnets power by redirecting one polarity towards the other side. 




Attached to the cup there is a threaded stud that will work perfectly with a standard nut or threaded hole.









Cup Magnets include countersunk holes or threaded features that allow for
mounting with standard hardware (nuts and bolts), as well as various
hooks.

Cup Magnets are intended to attract to a steel (or other ferromagnetic) surface.











Awesome advantages:




More Magnetic Strength: 3-5 times of common neodymium magnet. 




With the steel cup of a mounting magnet, the steel structure redirects
the magnetic field from the back-side of the magnet, turning it into
more useful holding strength. 




The Magnetic force is made stronger because the south pole is redirected to face north.











Durability: Our Mounting Magnets are constructed so that the surface of the magnet
is set very slightly below the surface of the steel cup. 




When it hits a
steel surface, the steel cup takes the brunt of most impacts.











cup magnets POTN01-76.2

Technical drawing of cup magnets POTN01-76.2

Specifications of cup magnets POTN01-76.2:

A | Diameter:	3''  / 76.20mm
B | Height:	1.5''  / 38.10mm
C | Cup Height:	0.75'' / 19.05mm
D | Stud Height:	0.996''  / 25.30mm
Thread Type:	37849
Surface Gauss	4390
Max Pull:	452 lbs / 205.02 kg
Product Material	NdFeB Magnet + Steep Cup + Epoxy
Plating/Coating	Nickel
Magnet Weight	1.277 lbs
Grade	N40
Br	12.5-12.8  KG
Hcb	≥11.4  KOe
Hci	≥12.0  KOe
BHmax	38-41  MGOe
Tmax	80C / 176F

Note: The max pull strength is measured by pulling the magnet directly off of a piece of steel.











Application of the cup magnetss:


















----------------------------------------------------------------------------------------------------------------




Introduction of Great Magtech:

Advantages of GME cup magnetss

1. High Grade / High performance of cup magnetss:




GME highest grade: N54, 52M, 50H, 48SH, 42UH, 38EH, 33AH, etc.

















2. High Consistency of cup magnetss: 




The Cpk of Remanence (Br) and Intrinsic Coercive Force (Hcj) are much higher than 1.67. 




The consistency of the surface magnetic field and magnetic flux can be controlled at +/-1%.


















3. High Working Temperature of cup magnetss:




GME magnets can satisfy the working temperature requirements with excellent temperature resistance. 




The AH series with 40 kOe super-high coercive force can replace Smco magnets in most applications.













4. Low Weight loss of cup magnetss:




GME super-high magnets have a long lifetime with the following specifications; PCT: 130C，humidity 100%，




vapor pressure 2.7bar, 20days，average low weight loss <2 mg/cm².













5. High anti-corrosion of cup magnetss:




 coating Nickel-Copper-Epoxy is typically more than 1000 hours.
























Cup magnetss Neodymium Magnets Manufacturing Processes:













Cup magnetss Neodymium magnets main manfucturing equipments:











How we test our Cup magnetss Neodymium Magnet:











How we pack Cup magnetss strong neodymium magnets:

Our Cup magnetss Neodymium Magnets are certificated by CE, Rosh....

We would love to see how you have used our magnets




Simply send us a photo of your magnets in use and if we use it on
our website we will return you $10 next order (Amount more than $1000).

  Be careful – they’re super strong unexpected!

As always, you can't be more careful when handling strong neodymium magnets.  Handle
these cup magnet with care, especially the larger ones. 




You don’t want to
pinch your finger between magnets that can exert hundreds of pounds of
force!

countersunk magnet 1x1/2x1/8' N40 for the fixing screw #6

countersunk magnet 1x1/2x1/8' N40 manufacturers,countersunk magnet 1x1/2x1/8' N40 exporters,countersunk magnet 1x1/2x1/8' N40 suppliers,countersunk magnet 1x1/2x1/8' N40 OEM service.

countersunk magnet for the fixing screw #6


Standard sizes ship within 2 weeks. custom-made size and grade are always available.

Neodymium countersunk magnet is special type of neodymium disc/block magnet with a hole fit for screw. 

We can provide neodymium countersunk magnets for various applications. 

Countersunk Magnets are often used in shelving and lighting systems, screens, window displays and signage.

Countersunk magnets are available with either pole on the magnetic face so that they can be used as a pair to attract or repel. 

If you are using two magnets to attract you need to make sure the opposite poles are facing each other as identical poles will repel!

countersunk magnet 1x1/2x1/8" N40

Technical drawing of countersunk magnet 1x1/2x1/8" N40

Features of countersunk magnet 1x1/2x1/8" N40:










Specifications:

A | Length:	1'' ± 0.005''
B | Width:	0.5'' ± 0.005''
C | Thickness:	0.125'' ± 0.005''
D | Hole Diameter	0.168''
E | Minor Diameter:	0.296''
F | Taper Angle:	82°
G | Hole Spacing:	0.5''  Center to Center
Mount With:	#6 Screw
Countersink On	North Polarity
Surface Gauss:	2575
Optimal Pull:	26.5 lbs
Material:	NdFeB Magnet Countersunk
Plating/Coating:	Nickel
Magnet Weight:	6.4 g
Grade:	N40
Br	12.5-12.8  KG
Hcb	≥11.4  KOe
Hci	≥12.0  KOe
BHmax	38-41  MGOe
Tmax	80C / 176F

MOQ	2000 pcs
Leading Time	18-23 working days
Sample	Yes
Certificate	ISO2000, TS16949, RoHS, CE & SGS
Payment	T/T, PayPal, Western Union

Application of the permanent magnet:


















----------------------------------------------------------------------------------------------------------------




Introduction of Great Magtech:

Advantages of GME permanent magnet

1. High Grade / High performance of permanent magnet:




GME highest grade: N54, 52M, 50H, 48SH, 42UH, 38EH, 33AH, etc.

















2. High Consistency of permanent magnet: 




The Cpk of Remanence (Br) and Intrinsic Coercive Force (Hcj) are much higher than 1.67. 




The consistency of the surface magnetic field and magnetic flux can be controlled at +/-1%.


















3. High Working Temperature of permanent magnet:




GME magnets can satisfy the working temperature requirements with excellent temperature resistance. 




The AH series with 40 kOe super-high coercive force can replace Smco magnets in most applications.













4. Low Weight loss of permanent magnet:




GME super-high magnets have a long lifetime with the following specifications; PCT: 130C，humidity 100%，




vapor pressure 2.7bar, 20days，average low weight loss <2 mg/cm².













5. High anti-corrosion of permanent magnet:




 coating Nickel-Copper-Epoxy is typically more than 1000 hours.
























Permanent Magnet Neodymium Magnets Manufacturing Processes:













Permanent Magnet Neodymium magnets main manfucturing equipments:











How we test our Permanent Magnet Neodymium Magnet:











How we pack Permanent Magnet strong neodymium magnets:

Our Permanent Magnet Neodymium Magnets are certificated by CE, Rosh....

We would love to see how you have used our magnets




Simply send us a photo of your magnets in use and if we use it on
our website we will return you $10 next order (Amount more than $1000).











WARNING:
Persons who are pregnant, wearing pacemakers, pacemaker defibrillators,
insulin pumps, or electric insulin devices, should not use magnetic
products.